Chronoskop CHR-9 Timegrapher
User manual
www.CHRONOSKOP.com
19
3.9. Measurement
– Time axis view
Impulse view
In this mode the pulses are plotted on the one second time axis in the middle part of the
display (see picture). The smallest division of the axis corresponds to 50 ms, one pixel
corresponds to 10 ms.
If a signal is accepted for evaluation, it will be indicated with a dash.
Clock Rate graph in the long-term monitoring
The graph of the long-tern rate monitoring helps you to observe how the rateof the clock
behaves for a long time. Graphing will restart if any of the following occurs:
•
Measurement is restarted
•
A different Beat Numer is detected during the measurement with automatic beat
number recognition
•
There is a strong disorder during the measurement
•
The measurement is ended
The graph above the horizontal dotted zero line represents a positive rate, below the line a
negative rate. The graph shows the total duration of the measurement.
