Chronoskop CHR-9 Timegrapher
User manual
www.CHRONOSKOP.com
8
1.3. Touchdisplay
The device has a touch display. It should not be confused with greater force than the weight
of 100g: Fracture risk! To operate the timegrapher use the included touch pen. Do not use
sharp metal objects. You can also use your fingernail or a blunt tip of a plastic pen. Fields
with a given touch function in the moment, are always described on display with bright
lettering on a dark background.
1.1. Commissioning
For power supply use only the power supply included in the
package or our battery pack. Commissioning of the unit should
be considered in the ambient temperature in which the
instrument has been calibrated (see chapter "calibration"). The
timegrapher turns on by pullig the touch pen from the housing.
To turn it off insert the touch pen back into the housing.
1.2. Battery mode
The device is equipped with a battery case, which is located on the lower side of the device.
In battery mode, the Timegrapher is operated with a 9 V block. In order to increase the
battery life, the display illumination can be switched off in the settings. It may happen that
when the battery power drops, the display contrast must be readjusted when switching to
battery operation.
OFF
ON
