Chronoskop CHR-9 Timegrapher
User manual
www.CHRONOSKOP.com
20
3.10. Measurement
– Impulse view
The Impulse View allows to study the beat closely. The width of the graphic represents a
time range of 100 ms. A beat is not displayed until it has been detected in long-term mode.
Manual adjustment of the lifting time of the balance
The buttons
and
can be used to switch between the manual and the automatic
detection of the lifting time of the balance. This value is decisive for the calculation of the
Amplitude. The lifting time of the balance is measured between the first and third pulse of a
beat and is shown in brackets (see picture). To manually limit the range, move the brackets
to the first and third peak. A manually set value of the lifting time is maintained until one of
the cases occurs:
•
Switching to automatic mode
→
•
The measurement is restarted
•
The measurement is ended
