Chronoskop CHR-9 Timegrapher
User manual
www.CHRONOSKOP.com
29
7. PC-
Software „Chronoport 2.0“
7.1. General functions
The „Chronoport 2.0“ software displays the measured data during the measurement on the
computer, which can be saved and printed. The measured curve of the complete
measurement is displayed graphically.
7.2. System requirements
Required operating system to start or to install the software: Microsoft Windows "Windows 98
SE" or higher.
If the system does not have the latest updates, it can happen that "Microsoft. NET
Framework" is not included. This can be installed during the installation from the CD or
downloaded and installed from the website of the software manufacturer Microsoft™.
7.3. Connect the Timegrapher
In order to use the software, a USB interface is required on the computer. The Timegrapher
can be connected to the PC at any time. However, the Timegrapher will be detected by the
Chronoport software in the main menu only.
