page 3
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
SAVE THESE INSTRUCTIONS
•
Never place your hand(s) or feet in the path of the roller arm because
injury may occur to you or damage may occur to the equipment. Refer
to Diagram 1.
•
Do not use accessory attachments that are not recommended by the
manufacturer—such attachments might cause injury.
•
Do not rock the unit. Do not stand on the display console or casing.
•
Do not attempt to service the EFX yourself other than the assembly and
maintenance instructions found in this manual. Refer to
Obtaining Service.
•
Do not overexert yourself or work to exhaustion. If you feel any pain or
abnormal symptoms, stop your workout immediately and consult your
physician.
HAZARDOUS MATERIALS AND PROPER DISPOSAL
The EFX556 has an internal battery which must be removed before the EFX is
scrapped. The battery contains materials which are considered hazardous to the
environment. Proper disposal of the battery is required by federal law.
To remove the battery from the EFX, take the following steps:
CAUTION: Unplug the battery recharger and disconnect it from
its receptacle at the rear of the EFX.
Tools required:
Phillips head screwdriver and hex wrench set.
1.
Remove both the right and left rear covers from the EFX.
2.
Remove the top rear cover.
3.
Unplug the black and red battery wires from the circuit board.
4.
Separate the circuit board from the battery by removing four screws.
5.
The battery is held in place with a metal bracket. Lift the battery away from
the bracket.
6.
Dispose of the battery according to the federal Hazardous Waste Regulations.
SAFETY APPROVAL
When identified with the ETL-c logo, the EFX has been tested and conforms to
the requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar
Electrical Appliances.
Diagram 1
Avoid injury from the roller arm
mechanism.
Front cover
Roller arm
IMPOR
T
ANT SAFETY INSTRUCTIONS
