page 25
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
QUICKSTART
: QuickStart lets you bypass the Setup prompts and start your
workout immediately using the Manual course.
Default values apply.
QUICKSTART Default Values
Prompts
Default Value
Course
Manual
Time
The Club limit (refer to page 17). Note that the Weight Loss
course is fixed at 28 minutes.
Weight
150 lbs. (68 kg.)
Age
0 : A valid Age must be entered to utilize the
SmartRate
dis-
play. If
QuickStart
is pressed
after
an
“Age” is entered, then
the
SmartRate
display will appear when you hold onto the
touch-sensitive grips on the handrail or wear the POLAR
®
chest
strap. If no
“Age” entry occurs, the
SmartRate
display lights
up, but no blinking sensor appears.
Note
: The POLAR
®
chest strap is available through your Precor dealer. Refer to
Optional Equipment on page 9.
The
QuickStart
key can be pressed any time during the Setup prompts. Default
values apply after that point. See the table below:
Press QUICKSTART at the...
The following occurs:
Precor
banner
You bypass the Setup prompts and your work out
begins in the Manual course.
Course
prompt
The displayed course is accessed.
Note
: Since a default workout time is accessed,
no progress message (such as 10% complete)
will appear on the display. The exception to this
rule is the Weight Loss Course.
Time
prompt
The time that appears on the display becomes
the workout time limit.
Time
may be set to any
value from 1 to the Club limit. If “unlimited” work-
out time is allowed by the Club, you can select it
by entering 0 with the numeric key.
Weight
prompt
The weight that appears on the display becomes
your designated weight that the EFX uses to
compute statistics. Acceptable entries are
between 1 and 999.
Age
prompt
The age that appears on the display becomes
the your designated age that the EFX uses to
compute statistics. A correct age entry between
1 and 99 is very important if you plan to utilize
the heart rate characteristics of the EFX. The
QuickStart
key acts the same as the
Enter
key
at this point because you have answered all the
Setup prompts.
