page 18
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
The field name
Odometer
appears briefly and then the odometer value (the cu-
mulative strides that users have travelled) appears.
Press
Enter
and the number of hours (
Hour Meter
) that the unit has been in use
appears. The EFX notes the passing of each 10th of an hour, but the numeric
value that appears is truncated to the nearest full hour.
Press
Enter
again and the unit’s three digit
Software Version
(upper and lower)
appears on the display.
Press
Enter
once again and the
Error Log
appears. Press the
▼
or
▲
key to view the
error messages. To return to the Precor banner, press
Enter
or
Reset
.
Note
: To
clear
(delete) the error log, press and hold
QuickStart
for at least four
seconds while viewing the list. Prompts appear on the display and let you know
when the error messages have been deleted (“cleared”) from memory.
Important
: You cannot retrieve the error log once you have deleted it.
USING CSAFE STANDARD EQUIPMENT
The EFX556 is fully compatible with CSAFE protocols. If the unit is connected to
a CSAFE master device, the user will be prompted to enter a user ID. Five zeros
appear on the display. The left zero blinks to indicate that it is awaiting input. The
following table provides information about the keypad functions:
User ID Entry: Program Keys
▼
or
▲
moves the blinking LED from field to field.
Number
keypad
use the number keys to enter a user ID. The number that is
pressed appears in the display and the next field begins to
blink. When all 5 user ID numbers are selected, the user
must press
Enter
to submit it.
Enter
submits the displayed user ID. Note that if the 5 zeros are
being displayed when the user presses
Enter
, the user ID
entry is bypassed and the
Course
prompt appears.
Reset
resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device.
Then, the
Course
prompt is displayed. See
Quick Steps to Working Out on page 28.
