Helios PD2-6080/PD2-6081 Modbus
®
Scanners
Instruction Manual
69
Digital Input Menu (
dI 1
)
Digital Output Menu (
dO 1
)
Reset Menu (
reset
)
The
Reset
menu is used to reset the maximum or minimum reading (peak or valley) reached by the process; both
may be reset at the same time by selecting “reset high & low” (
rst HL
). This is applied to all PVs and math channels.
Resetting is possible by going into the USER menu, selecting a function key or digital input, pressing ENTER to take
you to the next level, then pressing the Up arrow until you arrive at the RESET menu. Press ENTER to assign the
RESET menu to the selected function key or digital input. Now, when the scanner is in Run Mode, pressing the
selected function key will take you to the RESET menu, where you can scroll through Reset Hi (Max), Reset Lo (Min),
and Reset HiLo (Reset Max and Min), choosing what value to reset. You can also select the specific reset function
(e.g. Reset HiLo) to the selected digital input or function key.
