Precisa 360 ES Series, Руководство по эксплуатации

Страница: 30 / 77

■ 11 Application
28
11.4 Calculator
When the „CALCULATOR“ application is activated, each of the four function keys is assigned a calculation
method with the following settings.
„NAME“
Function key name, max. 5 characters.
„FACTOR“
Factor by which the weight is to be offset.
„MODE“
Multiplication of the factor by the weight or division of the factor by the weight.
„DECIMALS“
Definition of number of decimal places are to be shown in the result.
„DISPLAY TEXT“
Unit shown in the display, max. 3 characters.
„PRINTER TEXT“
Unit being printed, max. 8 characters.
In the program operation, the previously defined names of the keys appear over the function keys.
After pressing a function key, the current measurement is converted in accordance with the factor assigned
and the result shown or printed out after pressing the Print key.
Thus, for example, you can convert and display the weights of sample materials of known size directly into
“gram per cubic metre”.
+ 10,0000
9
«
A
»
„SET“ is flashing. The point of reference is measured
set
+ 30,0000
9
apply e.g. 20.0000g
set
+ 130,000
%
«
A
»
The weight is recalculated in percent (%) and displayed.
The reference quantity is set.
set
All subsequent measurements will now be shown as percentages of the reference weight so defined.
The percentage shown is printed by pressing the
« PRINT »
key.
• SETUP APPLICATION
CALCULATOR SET KEY-1 NAME nnnnn
FACTOR n.nnn e+n
MODE F * WEIGHT
F / WEIGHT
DECIMALS n
DISPLAY-TEXT nnn
PRINTER-TEXT nnnnnnnn
SET KEY-2 as for key 1
SET KEY-3 as for key 1
SET KEY-4 as for key 1
Display Key Step
+ 13,4560
9
«
F
» Press until „CALCULATOR“ appears.
calculator
Display Key Step