Precisa 360 ES Series Скачать руководство пользователя страница 50

Страница: 50 / 77

■

15 Differential weighing ("DIFF.-WEIGHT")

15.4.4 Deleting samples, groups

Press the «

DEL

» function key to go to the Delete submenu in the main menu.

Configuration of the function keys:

Press «

esc

» to exit the deleting process at any time without deleting.

15.4.5Statistics

Press the «

STA

» function key to go to the Statistics submenu in the main menu.

Configuration of the function keys:

15.4.5.1Statistics printout

Configuration of the function keys:

15.4.6 Report

The differential weighing report is printed after every residual weighing. Individual options in the report can

be switched on and off.
If the «

PRINT

» key is pressed in sample information, the result is output in all the units.

If the «

PRINT

» key is pressed during the recording of the measurements, the current weight is printed in the

- - - - - - - -

Delete submenu

-S-

-G-

ALL

Key

Functions

-S-

Delete a single sample.
The sample to be deleted can be selected by pressing the «

», «

» keys. The sample

is selected by pressing the «

» key.

-G-

Delete all the samples in the selected group.
The group to be deleted can be determined by pressing the «

», «

» keys. The group

is selected by pressing the «

» key.

ALL

Delete all the saved samples.

As a safeguard, the deleting process must be confirmed by selecting "YES" and

pressing «

». Nothing is deleted if the user selects "NO" or presses «

esc

».

- - - - - - - -

Statistics submenu

-V-

-R-

ALL

Key

Functions

-Gx-

Select the group for which statistics are to be compiled. "x" indicates the active

group.

-V-

Prints the measurement readings for all the samples in the selected group. The result

is only printed in the unit which is set.

-R-

Prints the statistics on the results for the selected group.

ALL

Starts the Statistics printout submenu.

- - - - - - - -

Statistics printout submenu

STD

Key

Functions

STD

Prints the measurement readings for all the samples and the statistics on the results

for the selected group. The result is only printed in the unit which is set.

Prints measurement readings and statistics on all the samples in the selected group in

tabular form. The individual values are separated by a tab.

Содержание 360 ES Series














































































Результаты поиска

Содержание 360 ES Series

Отзывы:

Бренды по названию

Популярные бренды

Precisa 360 ES Series, Руководство по эксплуатации

Результаты поиска

Содержание 360 ES Series

Отзывы:

Бренды по названию

Популярные бренды