Precisa 360 ES Series, Руководство по эксплуатации

Страница: 47 / 77

15 Differential weighing ("DIFF.-WEIGHT") ■
45
En
gl
is
h
15.4.1 Mode, measurement recording
There are four different options available for semiautomatic measurement recording.
Key:
T: Tare I: Original weight R1-R3: Residual weight 1-3
Single
Group 1
Group 2
Series
Navigation
The differential weighing program works with semiautomatic measurement recording. Once one value has
been measured, the program automatically navigates to the next one.
The user can navigate between the measured values using the arrow keys , as shown by the arrows in the
graphics. If a reading has been measured incorrectly, the user can navigate back to it with the arrow keys
provided this navigation is possible (see the graphic for the set mode).
The tare weight, original weight and residual
weight are recorded in consecutive order for each
sample. Once the measurements for one sample
have ended, the next one can be started.
The tare weight and original weight for each
sample are recorded at the start. The residual
weights are then measured for all the samples.
The tare weight and original weight for each
sample are recorded at the start. Then determine
the first residual weight for all the samples,
followed by the second residual weight for all the
samples, etc.
The tare weight is measured for each sample at
the start. Then record the original weight for all
the samples and, after that, re-weigh all the
samples.
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3
T I R1 R2 R3