Precisa 360 ES Series, Руководство по эксплуатации

Страница: 18 / 77

■ 10 Operation
16
10.1.2 Operation in the programming mode
The balance can also be operated by remote control. For the corresponding remote control-commands see
chapter 21.2 "Remote control-commands".
10.2 Setting the factory configuration
• Press « ON/OFF » to switch the balance on.
• During the start-up process, hold down the « T » and « MENU » keys until „FACTORY CONFIG.“ appears in
the display, then relase the keys. The balance loads the factory configuration.
10.3 Device configuration
This section explains the structure of the configuration menu and its functions.
The basic adjustment of the balance is defined in the configuration:
NOTE
For the operation of the « T », «
F
» and « PRINT » see chapter 10.4 "Special operating keys".
Keys Designation Function in programming mode
«
A
», «
B
» • Changes within the menu level
«
C
»
«
D
»
• Up/Down movements within the menu
• Changes selected parameters
« E »
• Selects parameters
• Stores the changed parameters
« esc »
• Interrupts an input
• Leaves the menu
« ins » • Places insert marker (in text entry)
« clr » • Deletes input (in text entry)
« PRINT » • Inputs a point (in text entry)
Menu Definable functions
UNIT-1 Unit in which the weighing results are displayed
SET DATA PRINT
Print formats; Type of values to be printed (individual values, continuous printout,
time or load change dependent values, date, time, user, etc.)
SET CALIBRATION Calibration method
SET
WEIGHING MODE
Stability mode (Quality of the balance location), Auto-Standby mode, zero correc-
tion, tare method (rapid or standard tare)
SET INTERFACE Baud rate, parity, handshake functions of the peripheral interface
SET
DATE AND TIME
Date and time (standard format or American format p.m. and a.m.)
THEFTCODE Activating/deactivating and changing the anti-theft code.
0/T
esc
0/T
ins
clr