Precisa 360 ES Series, Руководство по эксплуатации

Страница: 49 / 77

15 Differential weighing ("DIFF.-WEIGHT") ■
47
En
gl
is
h
15.4.3 Sample information
The user can switch to the info display for the current sample during the measurement recording by pressing
«
F
».
Configuration of the function keys:
+ 15,85000
9
«
E
» Accept tare weight 1.
1-1 t + 15,85000 9
+ 15,85000
9
Fill container 1 with original weight 1 and place it on.
1-1 I + 0,00000 9
+ 56,10000
9
«
E
» Accept original weight 1.
1-1 i + 40,25000 9
As group 1 mode is set, the program automatically switches to the tare measurement for sample 2. Remove original
weight 1 from the weighing pan and, if necessary, tare the balance.
+ 0,00000
9
Measure tare weight 2, i.e. place on empty container 2.
1-2 t +0.00000 9
+ 15,87504
9
«
E
» Accept tare weight 2.
1-2 t + 15,87504 9
+ 15,87504
9
Fill the container with original weight 2 and place it on.
1-2 I + 0,00000 9
+ 54,53186
9
«
E
» Accept original weight 2.
1-2 i + 38,65682 9
As group 1 mode is set, the program switches automatically to the tare measurement for sample 3.
+ 54,53186
9
«
B
» Switch to residual weight 1 for the first sample.
1-3 t + 54,53186 9
If necessary, tare the balance. The negative weight reading in the info line corresponds to tare weight 1.
+ 0,00000
9 Place residual weight 1 for the first sample (including
the container) on the balance.
1-1 r1 - 15,85000 9
+ 50,32364
9
«
E
» Accept residual weight 1.
1-1 r1 + 34.57364 9
- 14,10
%
Display the result of residual weight 1. (Loss in
percent). Print out the sample report.
1-1 diff1
In order to measure a second residual weight for the same sample, press the
«
B
»
key. In order to determine the
residual weight 1 in the second sample, press the
«
D
»
key.
Key Functions
«
A
», «
B
»
In the measurement display: switch between the readings shown
In the results display: switch back to the measurement display
«
C
»
«
D
»
If a residual weight is displayed: switch to the results display
In the results display: switch to the result unit
« esc » Exits the info display
« PRINT »
Prints the sample info, including all the measurement readings
The result is printed in all the units (see chapter 15.4.6 "Report").
Display Key Step