MT4000-2 MT10000-4
ISMTUK_06_06.doc
Pag. 16
5. Control Unit programming and testing
This chapter outlines a practical example of the configuration of a control unit with SWAMIGO software. To
obtain more detailed information on the programming of the terminal consult the software manual. The manual
is available in PDF format in the Manuals section of the SWAMIGO installation CD
5.1. Creating the site
To start the application, use the "Amigo" link which was created on the desktop during program installation: the
Amigo activation dialog will appear:
Enter the licence code and key (supplied together with the
programme) and press the green button to confirm.
If the entered codes are correct, the program will be activated and the system access window will appear.
Type in the following codes and click the green button:
Operator:
ADMIN
Password:
ADMIN
Hover the mouse pointer over the “Amigo” label and right-click the mouse to display the menu shown in the
figure:
Select the “New site” item
A window appears which can be used to create a new site and set up communication with the terminals.
