OPERATOR PARAMETERS
The Operator Page contains the parameters and the commands that are used most frequently for day-to-day operation. This
page is not locked for editing by Master Lock. The Operator Page parameters are listed below.
Table : 5.1
Parameter Description
Settings
(Default Value)
None
Copy (New)
Re-copy (Old)
Read Chan Names
Recover
(Default : None)
SELECT OPTION FOR
OPERATION ON PEN DRIVE
Select Option>>
None
(Available only when a Pen Drive is attached to the USB socket)
None
No operation
Copy (New)
Download available New Records to Pen Drive. This option is not
presented if there are no new records stored in the internal
memory.
Re-copy (Old)
Download available Old Records to Pen Drive. This option is not
presented if there are no old records stored in the internal memory.
Read Chan Names
Update channel names by reading the text file,
Set.txt
, from the
Pen-Drive. This option is not presented if the Pen-Drive does not
contain
Set.txt
file in its root (main) directory.
Recover
This option is presented only if a prior ‘Copy (New)’ or ‘Recopy
(Old)’ operation was interrupted. The interrupted operation is
resumed from the beginning.
‘START’ COMMAND FOR
BATCH RECORDING
BATCH START>>
NO
(Available if Batch Recording is selected)
Set to ‘Yes’ to start recording the data. This is usually issued at the
begin of a time-slot recording.
‘STOP’ COMMAND FOR
BATCH RECORDING
BATCH STOP>>
NO
(Available if Batch Recording is selected)
Though the Batch Recording automatically stops at the end of the
set time interval; it may be desired to abort recording any time
during the batch. Set this command to ‘Yes’ to stop recording the
data.
(Default : No)
No
Yes
(Default : No)
No
Yes
User Manual
UniRec
14
Section 5
