PPI UniRec Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 27

PPI UniRec Скачать руководство пользователя страница 6

If multiple channels are under Alarm condition; use UP / DOWN keys to scroll through the various Device channels for

viewing the individual Alarm status information.

Note:

The front panel ENTER key can be used as Alarm - Acknowledge key. Use Alarm Acknowledgment feature to de-activate the

Alarm relay. Note that acknowledging the Alarm(s) does not remove the Alarm condition(s).

Recording Information

Screen

This screen facilitates viewing information related to the recording feature. Use UP/DOWN keys to scroll through the

various information described below in Table 2.2.

Table 2.2

Balance Time>>

1:12:36

Information

Sample Screen

New Records>>

12523

Old Records>>

10067

Free Space>>

3833410

First Record>>
Date: 01:01:11

This information is available if ‘Batch Recording’ mode is selected
and shows the remaining batch time in Hours:Minutes:Seconds
(HH:MM:SS) format if the batch is in progress. Upon completion or
prior to start of the batch, the remaining time is shown as 0:00:00.

REMAINING BATCH TIME

NEW RECORDS IN MEMORY

Shows the numbers of new records available in the recorder
memory for copying (downloading) to Pen-Drive using ‘Copy
(New)’ command.

Shows the numbers of old records available in the recorder
memory that were copied (downloaded) in the previous session.
These records can be re-copied using ‘Re-copy (Old)’ command.

OLD RECORDS IN MEMORY

Shows the recorder memory space available for new records.
That is, this information shows how many more new records can
be stored in the memory before it gets full.

FREE SPACE AVAILABLE FOR NEW RECORDS

This information shows the calendar date of recording of the first
available new record in the memory. This information does not
appear if there are no new records in the memory.

DATE STAMP FOR THE FIRST
NEW RECORD IN THE MEMORY

This information shows the clock time of recording of the first
available new record in the memory. This information does not
appear if there are no new records in the memory.

TIME STAMP FOR THE FIRST
NEW RECORD IN THE MEMORY

First Record>>
Time: 23:05:40

User Manual

UniRec

4

Boiler Pressure

AL1 AL2

«
...
4
5
6
7
8
...
»

Содержание UniRec




























Отзывы:

Нет отзывов