manualshive.com logo in svg

PPI UniRec, Руководство пользователя, Страница: 13 / 27

Поделиться
Скачать
PPI UniRec Скачать руководство пользователя страница 13

The upper row shows the operation type; Copying for 'Copy' operation or Re-copying for 'Re-copy' or 'Recover' operation. 

The Lower Row displays countdown of the numbers of balance records. Upon successful completion of the operation, the 

UniRec displays the total numbers of records copied (or, re-copied) through the following message:

Records Copied
1234

Remove the Pen Drive and acknowledge the message using ENTER key. The UniRec reverts to normal RUN mode.

‘Read Chan Names’ Operation 

Upon  selecting  ‘Read  Chan  Names’  operation,  the  UniRec  opens  the  file  named 

Set.txt

  for  reading  the  user  defined 

channel names (refer section “File System for Read Operation”). If there is an error in opening the file or any other errors 

encountered while reading the file; the UniRec displays an appropriate error message on the Upper Row of LCD display. 

For various error messages and their meaning, refer Table 3.2 below.

Table : 3.2

Error Message

What it Means

Cant Open File

Unable to open the 

Set.txt

 file or read the file size 

Cant Close File

Unable to close the file after successful reading 
of channel names 

Cant Read File

Unable to read the channel names from the file

In case of any of the above Error Messages, make sure that the Pen Drive is firmly inserted in the USB port and retry the 

operation  by  acknowledging  the  error  message  through  front  panel  ENTER  key.  If  the  error  persists,  replace  the  Pen 

Drive.

However, if no error is encountered while opening, reading or closing the file, the UniRec displays the following message 

after successfully reading and assigning the user defined names to the channels.

Names Assigned

USB Port Failure

In case of any failure of the USB port itself; depending upon the type of the error one of the following two messages may 

be displayed on the front panel LCD.

Cant Change Baud

Cant Sync USB

Remove the Pen Drive and acknowledge the message using ENTER key. The UniRec reverts to normal RUN mode.

The UniRec needs servicing for any further Pen Drive operations. 

 User Manual

UniRec

11

Содержание UniRec




























Отзывы:

Нет отзывов