PPI UniRec Скачать руководство пользователя страница 14

Страница: 14 / 27

SET-UP MODE : ACCESS AND OPERATION

The UniRec requires various user settings that determine how the Recorder will function or operate. These settings are

called Parameters.

The parameters are always presented in a fixed format: The Upper Row displays the

Parameter Name

and the Lower

Row displays the options / set value. The parameters appear in the same sequence as listed in their respective sections.

For convenience and ease of memorizing, the various parameters have been arranged in different groups depending

upon the functions the parameters represent. Each group is assigned a unique Page Header for its access.

SET-UP MODE

The Set-up Mode allows the user to view and / or modify the parameter values. Follow the steps below to open a desired

Page Header for setting the parameter values.

1. Press and release PAGE key. The Upper Row shows SELECT PAGE and the Lower Row shows the name for the first

available Page Header. See Figure below.

SELECT PAGE>>

Operator Page

2. Select the desired Page Header / Sub-header name on the Lower Readout using the UP/DOWN keys.

3. Press and release ENTER key. The Upper Row shows the name of the first parameter listed in the selected Page Header /

Sub-header and the Lower Row shows its current value.

Adjusting Parameter Values

Once a Page Header is accessed; step through the following sequence to adjust the values of the desired parameters.

1. Press and release the ENTER key until the name for the required parameter appears on the Upper Row. The last parameter

in the list rolls back to the first parameter.

2. Use UP / DOWN keys to adjust the parameter value.

3. Press and release the ENTER key. The new value gets stored in the non-volatile memory and the next parameter in the list

is displayed.

The figure 4.1 below illustrates how to access the desired Page Header and edit the parameter value. The illustration shows

the example of altering the value for the parameter Recording Mode (available in sub-header “Recorder Configuration”) from

‘Continuous’ to ‘Batch’.

Figure 4.1

Boiler Temp.

MAIN Display Mode

SELECT PAGE>>

Operator Page

First Available Page Header

SELECT PAGE>>

Recorder Config

RECORDING MODE>>

Continuous

BATCH TIME>>

1:00

Desired Page Header

NORMAL INTERVAL>>

0:00:30

First Parameter

Desired Parameter with

Next Parameter

91 C

RECORDING MODE>>

Batch

Current Value

Desired Parameter with

New Value

User Manual

UniRec

Section 4

Содержание UniRec




























Результаты поиска

Содержание UniRec

Отзывы:

Похожие инструкции для UniRec

Бренды по названию

Популярные бренды

PPI UniRec, Руководство пользователя

Результаты поиска

Содержание UniRec

Отзывы:

Похожие инструкции для UniRec

Бренды по названию

Популярные бренды