User Manual
ScanLog 96 Pen Drive Version
4
Boiler Pressure
AL1 AL3
For Dual Channel Version, if both channels are under Alarm condition; use UP / DOWN keys to scroll through the channels for
viewing the individual Alarm status information.
Note :
The front panel ENTER key can be used as Alarm - Acknowledge key. Use Alarm Acknowledgment feature to de-activate the Alarm relays.
Note that acknowledging the Alarm(s) does not remove the Alarm condition(s).
Recording Information Screen
This screen facilitates viewing information related to the recording feature. Use UP / DOWN keys to scroll through the various
information described below in Table 2.2.
Table 2.2
REMAINING BATCH TIME
This information is available if ‘Batch Recording’ mode is selected
and shows the remaining batch time in Hours:Minutes:Seconds
(HH:MM:SS) format if the batch is in progress. Upon completion or
prior to start of the batch, the remaining time is shown as 0:00:00.
Balance Time>>
1:12:36
Information
Sample Screen
NEW RECORDS IN MEMORY
Shows the numbers of new records available in the recorder
memory for copying (downloading) to Pen-Drive using ‘Copy
(New)’ command.
New Records>>
12523
OLD RECORDS IN MEMORY
Shows the numbers of old records available in the recorder
memory that were copied (downloaded) in the previous session.
These records can be re-copied using ‘Re-copy (Old)’ command.
Old Records>>
10067
FREE SPACE AVAILABLE FOR NEW RECORDS
Shows the recorder memory space available for new records.
That is, this information shows how many more new records can
be stored in the memory before it gets full.
Free Space>>
3833410
DATE STAMP FOR THE FIRST NEW RECORD IN THE
MEMORY
This information shows the calendar date of recording of the first
available new record in the memory. This information does not
appear if there are no new records in the memory.
First Record>>
Date: 01:01:20
TIME STAMP FOR THE FIRST NEW RECORD IN THE
MEMORY
This information shows the clock time of recording of the first
available new record in the memory. This information does not
appear if there are no new records in the memory.
First Record>>
Time: 23:05:40
