User Manual
ScanLog 96 Pen Drive Version
12
OPERATOR PARAMETERS
Section 4
The Figure 4.1 shows how to access Operator Parameters. The Example illustrates how to start batch recording.
The Table 4.1 below described the Operator Parameters in detail.
Figure 4.1
Table 4.1
Parameter Description
Settings
No
Yes
This command is presented only while the ScanLog is
downloading (copying) the records to pen drive. Set this
parameter to ‘Yes’ to abort the copying operation.
STOP COPY
(Available only when a Pen Drive is attached to the USB socket.
This list is also presented automatically in the Run Mode upon
detection of the Pen Drive insertion)
Refer Section 3 : PEN DRIVE OPERATION for details on each
operation.
SELECT OPTION
1. None
2. Copy (New)
3. Re-copy (Old)
4. Read Chan Names
5. Recover
(Default : None)
Main Screen
First (desired)
Page
First Parameter
Press SET-UP Key
Press ENTER Key
To open Operator
Parameter List
Boiler Pressure
2.1 PSI
SELECT PAGE>>
Operator Paras
BATCH START>>
No
or
Desired Value
Press UP/DOWN Keys
to adjust Parameter Value
Press ENTER Key
to store the New Value
& to move to Next Parameter or
return to Main screen
BATCH START>>
Yes
Main Screen
Boiler Pressure
2.1 PSI
