User Manual
ScanLog 96 Pen Drive Version
13
Parameter Description
Settings
No
Yes
BATCH START
(Available if Batch Recording is selected)
This parameter is presented only if the batch is not already
started.
Set BATCH START command to ‘Yes’ to start recording the data.
This is usually issued at the begin of a batch process.
(Available if Batch Recording is selected)
This parameter is presented only if the batch is already started.
Through the Batch Recording automatically stops at the end of the
set time interval; there may be a need to abort recording any time
during the batch. Set BATCH STOP command to ‘Yes’ to stop
recording the data and terminate the batch.
BATCH STOP
No
Yes
