background image

PAS26R CROSSOVER AUTOMATIC SCRUBBER

4

Dear Customer,
Tacony Corporation would like to thank you for choosing to purchase this new ride-on automatic scrubber which thanks 

to its features - described in this manual - we are confident will satisfy your needs.
This machine has been entirely designed and constructed with top-quality materials and devoting a special effort to 

reducing the risk of accidents as much as possible.
We have prepared this manual in order to provide you with adequate instructions on the correct use and maintenance, 

which are essential for the operator’s safety.
Please carefully read this manual in its entirety, strictly comply with the instructions it contains and above all - for safety 

reasons - do not perform any type of procedure that is not specifically mentioned herein.

The following symbols are used in the guide for the purposes outlined by the following descriptions:

Hazardous or unsafe procedures that might cause severe personal injury or even be fatal.

Hazardous or unsafe procedures that might cause non-severe personal injury or damage to the 

machine or surrounding objects.

Used to identify actions to be undertaken for safe machine operation.

Before using the device for the first time, read these original instructions, follow them and store 

them for future use or in case of resale of the device.

Specifications and parts are subject to change without notice. 

Original Instructions. Copyright© 2016 Tacony Company. 

All rights reserved.

Les caractéristiques et les pièces sont sujettes à modification sans préavis. 

Traduction des instructions originales. 

Droit d’auteur© 2016 Tacony Company. 

Tous droits réservés. 

Los componentes y las especificaciones están sujetos a cambio sin previo aviso. 

Traducción de las instrucciones originales. 

Copyright© 2016 Tacony Company. 

Todos los derechos reservados.

 1. PRESENTATION

 SYMBOLS

FOR SAFETY

CAUTION

WARNING

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Содержание PAS26R





























Отзывы: