PAS26R CROSSOVER AUTOMATIC SCRUBBER
19
14.3.8. BATTERY CHARGE STATUS INDICATOR (8)
The LED display signals the battery charge status.
Do not charge the batteries before using the machine for at least 60 minutes, in order to not damage charging
cycles.
14.3.9. HOUR COUNTER (9)
The display indicates the machine’s operation hours since control unit activation when the automatic scrubber
was constructed. The hour counter activates at the start of brush rotation and de-activates when they stop.
Therefore, machine movement hours are actually measured.
14.3.10. ACOUSTIC SIGNAL (10)
Horn or audible signal. Push button to activate.
14.3.11. SPEED CONTROL KNOB FOR MAXIMUM WORKING SPEED (11)
The knob controls the maximum forward speed of the machine. The speed can be changed by the operator by
turning the rotating knob (12) counter-clockwise to decrease and clockwise to increase. The speed is the same;
adjustable through the accelerator pedal itself.
FOR SAFETY
14.4.1. SPEED CONTROL PEDAL
It is located to the right of the steering column. It controls the machine’s speed.
The motion speed is increased by lightly pressing the pedal.
The motion direction (forward gear or reverse) is controlled by the panel selector.
The maximum speed is still settable, only during operation and when the brushes
are working, through the knob on the control panel, next to the steering column.
14.4.2. CONTROL AND PARKING BRAKE
The machine is equipped with a parking and control brake, of the electric brake type,
built into the motor axle.
The brake is always engaged every time the machine selector is OFF and the
operator is not seated on the driving seat.
The brake is automatically disengaged with selector ON and operator seated (there
is a safety micro-switch under the seat).
Operators can activate the brake to reduce the speed or stop the machine while in
motion.
Engaging the parking brake is necessary in special conditions, such as on slightly
sloping paths or the operator needs to temporarily stop the machine.
14.4. CONTROLS
https://harrissupplyind.com - To Order Parts Call 608-268-8080
