PAS26R CROSSOVER AUTOMATIC SCRUBBER
21
The batteries supply the power to operate the machine. For the batteries to always achieve peak performance, some
maintenance operations must be regularly carried out.
For the batteries to last as long as possible, recharge them every time the charge indicator reaches the first red mark,
shown by the display on the control panel.
Do not let the batteries run completely down. Never expose spent batteries to temperatures lower than freezing point
(32°); the liquid inside them freezing might lead to cracking of the outer plastic casing (lead acid battery versions).
Do not start the machine unless the batteries are in good condition or if the charge status is lower than 25%.
Never place metal objects on top of the battery, as they might cause a short circuit. Replace damaged or worn cables or
terminals.
Check the electrolyte level in each battery element before and after charging. Never add acid to the batteries; only use
distilled water.
Never let the water level go below the battery plates; the parts of the plates exposed to air would be damaged. Do not
excessively fill the battery. Always securely insert all caps.
When performing maintenance operations, avoid contact with the acid.
The batteries emit hydrogen. Risk of fire and explosions.
Keep the batteries away from sparks and naked flames. Remove all caps
before charging the batteries.
Always wear protective gloves and glasses to perform battery
maintenance. Charge the batteries in a well-ventilated area.
When charging the batteries, lift the recovery tank as shown in the photo
to the right.
14.5.2. BATTERY CHARGER SOCKET
It is located directly on the steering column.
When the machine is powered by its own batteries, the socket must
be engaged.
In the event of recharging the batteries, the top socket must be
detached and the battery charger plug must be inserted into the lower
socket.
The sticker shown in the picture to the right indicates the direction of
insertion of the battery charger plug.
15. MAINTENANCE
15.1. BATTERIES
https://harrissupplyind.com - To Order Parts Call 608-268-8080
