52
Operation
3.3.2
Accelerating
• Set the required driving direction
with the direction switch: set the
switch to the front to drive forward,
set the switch to the rear to reverse.
• Release the parking brake, refer to
Safety Catch in Section 3.2.1.
• Press the accelerator down slowly
with your right foot until you reach
the required driving speed.
3.3.3 Stopping and parking
• Remove your right foot from the ac-
celerator to slow down. When the
foot is fully removed from the accel-
erator, the vehicle rolls to a stop.
• Now press the right foot on the ser-
vice brake pedal to stop the vehicle
and bring it to a stop.
• Turn the key in the key switch coun-
terclockwise to lock position 0 and
remove the key.
• Press the left foot on the parking
brake pedal to park the vehicle.
Always apply the parking brake
and remove the key before get-
ting out of the vehicle!
3.3.4 Cleaning
If the pre-sweep/vacuum and vacuum-
ing tool options are installed, a total of
six cleaning programs are available for
selection:
1. Sweeping (option)
2. Sweeping (option), wet scrubbing
and dry vacuuming
3. Wet scrubbing and vacuuming dry
4. Wet scrubbing (basic cleaning)
5. Vacuuming dry
6. Vacuuming with the hand-held suc-
tion hose (option) / Working with the
additional spraying/vacuuming tool.
The cleaning programs are activated
via the left-hand operating panel, refer
to Section 3.2.2. Press the relevant but-
ton as soon as the scrubber drier is
ready to operate (see above).
