PowerBoss Admiral 40D, Инструкция по эксплуатации

Страница: 32 / 112

32
Operation
• Hand-held vacuum cleaner
(Fig. 16/5)
Area of use: For vacuuming up water
manually in areas which are difficult
to access.
The hand-held vacuum cleaner can
be fixed to the tool holder (refer to
spraying-vacuuming tool).
The hand-held vacuum cleaner con-
tains:
- Adapter to connect the following
tools (7893)
- Suction hose (flexible plastic ex-
tension hose), length: 9.8 ft (7880)
- Suction pipe (for connection to the
plastic extension hose), length:
4.3 ft (7881)
- Suction nozzle with rubber lips
(7883)
Operation of the hand-held vacuum
cleaner: refer to Spraying/Vacuum-
ing Tool, page 31.
• Side collision protection
(Fig. 16/6)
(7680.10 (long version) and 7680.20
(short version))
The side collision protection consists
of two steel bars which can be as-
sembled on the right and left-hand
sides of the vehicle at the height of
the circular brushes and deflectors to
protect the scrubber drier from dam-
age cause by collisions. The side
collision protection can be disassem-
bled quickly, without the need of any
tools.
The long version is used when the
scrubber drier is operated without
the side scrubbing unit option in-
stalled (long steel bar on left and
right-hand sides). The short version
is used when the side scrubbing unit
option is installed (long steel bar on
left-hand side, short steel bar on
right-hand side).
• Side scrubbing unit
(Fig. 16/7) (7586.02)
Consists of a pivoting side scrubbing
brush for the right-hand side of the
vehicle.
Area of use: For thorough cleaning
along edges and borders.
Please refer to our spare parts
catalogue in Internet under
www.powerboss.com for infor-
mation on accessories such as
brushes, pads, drive plates
with centerlock etc.
Chemical dosing system
(Fig. 17/1) (7564.02)
The chemical dosing system adds a
chemical cleaning agent to the fresh
water. The chemical cleaning agent is
in a canister (Fig. 17/2) and is not part
of the scope of delivery of the chemical
dosing system.