PowerBoss 82 Europe, Руководство пользователя

Страница: 42 / 88

PowerBoss, Inc. Copyright 2011
Monitor Series PB# 4100031 Rev.B 09/11
Page 42
2. Valve must be returned to its original position
for normal operation the machine.
ATTENTION!
Do not tow or push the machine a distance of
more than .5 miles (.80 kilometers) or faster than
one mile per hour (1.61 km). Exceeding these
restrictions may cause damage to the hydraulic
system. If towing will exceed the above
restrictions, the rear wheel must be raised or
supported by a dolly.
MACHINE OPERATION
TRANSPORTING THE MACHINE
Using a Trailer or Transport Vehicle
1. Position the machine on the transport vehicle
or trailer and apply the parking brake.
2. Chain the machine down using the two (2) tie-
down holes in the frame in front of both front
wheels and one (1) @ the rear center of the
frame extension bumper.
NOTE: Attach Tie Downs To The Frame &
Extension Bumper Only!
Pushing the Machine
Push the machine from the front or rear using the bum-
pers only.
NOTE: The propulsion pump is equipped with a
tow valve located on the top of the pump.
To engage the tow valve:
1. Turn the flat-sided shaft at the top of the pump
90°.