PowerBoss 82 Europe, Руководство пользователя

Страница: 69 / 88

Monitor Series PB# 4100031 Rev.B 09/11
PowerBoss, Inc. Copyright 2011
Page 69
7. Align the holes in the lift arms with the hole in
the scrub deck on both sides. Adjust by rotating
the lift arm to move in or out on the rod end.
8. Attach the lift arm to the scrub deck on both
sides using the screws, washers and lock nuts.
9. Tighten the lock nut securing the rod ends to
the lift arms, both sides.
10. Close scrub doors, put the parking brake on.
Turn scrub deck on and press the brake and
forward pedals until the scrub deck turns on.
11. Shut scrub deck off and raise the scrub deck.
12. Move the unit far enough to look at pattern
created on the floor, it should have three
uniform circles.
13. If not readjust scrub deck. If pattern is ok, open
scrub doors and reinstall squeegee blades and
hitch pins on both sides.
14. Close scrub doors.
8 1/2”(REF)
OR
9 1/4”(REF)
CORRECT BRUSH PATTERN
INCORRECT BRUSH PATTERN
INCORRECT BRUSH PATTERN