PowerBoss 82 Europe, Руководство пользователя

Страница: 50 / 88

PowerBoss, Inc. Copyright 2011
Monitor Series PB# 4100031 Rev.B 09/11
Page 50
Air Filter Cleaning
1. Once you have removed the air filter elements,
empty the dust cup and clean the interior of
the air filter housing.
2. Use an air hose to blow out the air filter
elements. Air pressure should be 100 psi or
less.
Air Filter Inspection
1. After you clean the air filter elements, check
the elements for holes by passing a light bulb
inside it.
Air Filter Installation
1. Wipe out the air cleaner housing with a damp
cloth. Be sure all dirt is removed.
2. Install the cleaned replacement filter elements
so that the fins are at the far end of the
housing. Be careful not to damage the fins.
3. Replace the rubber plug in the dust cup.
4. Replace dust cup, being sure embossed word
“top” on cup is positioned correctly
(up).
5. Tighten the ring clamp or retaining clips.
6. Check the condition of intake hoses and
clamps. Close engine cover.
ELECTRICAL SYSTEM
Battery Cleaning
1. Combine baking soda and water in a strong
solution.
2. Brush the solution over the battery top,
including terminals and cable clamps. Make
sure the solution does not enter the battery.
3. Using a wire brush, clean the terminal posts
and cable clamps.
4. Apply a thin coating of petroleum jelly to the
terminals and cable clamps.
PREVENTATIVE MAINTENANCE