PQube 3 Instruction Manual
Page 11 of 103
2.4
Choosing Modules
IMPORTANT
:
Installation, service, and maintenance of your PQube 3 must only be done by
qualified personnel for electrical installations.
Each PQube 3 comes standard with the following features:
Three AC mains voltage channels
Eight current channels (for CTs with 0.333V secondary)
Four analog input channels for additional signals (for example, the output of a power
supply)
One digital input channel (monitor the state of an interlock switch)
One signal output relay (notify your PLC that an event has occurred)
Power supply input rated for 24VAC or 24-48VDC
One 10/100 Ethernet port (PoE compatible!)
One Hi-speed USB 2.0 port (for USB drive or ENV2 environmental probe)
Two standard USB 1.0 ports (for ENV2 environmental probes)
Full color touchscreen
8GB internal memory
One 8GB microSD card
One USB drive included with each PQube 3 (contains manual, quickstart guide, setup file,
Configurator program, Report Writer program)
If you need additional functionality or inputs beyond the standard PQube 3 feature set, you can
purchase optional modules for your PQube 3.
To choose modules for your application, you’ll need to answer four simple questions:
Do I need to power my PQube 3 from 100~240Vac (50/60/400 Hz)?
Do I need battery backup in the event of a power outage?
Do I need current inputs to measure the 1A or 5A secondary of a CT?
Do I need ANSI Class 0.2 or IEC 62053-22 Class 0.2S revenue energy accuracy?
Do I need ultra-precise GPS timestamps on your data?
Do I want to record the environmental conditions such as temperature, humidity,
pressure, or acceleration in addition to everything about the electric power?
Do I need to measure full spectrum radiation using a Pyranometer?
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
