Power One AURORA Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 65

Power One AURORA Скачать руководство пользователя страница 40

Installation and operator’s manual

Page 40 of 65

PVI-2000-OUTD-AU Rev.: 1.0)

5.4

Messages and Error Codes

The system status is identified through message or error signals appearing on the LCD
display.
The tables below summarise the two types of signals that can be displayed.

MESSAGES identify the AURORA current status; so they do not relate to faults and
nothing has to be done. The message will disappear as soon as standard conditions are
restored. See the Warning column (W) in the table below.

ERRORS identify a possible fault of the equipment or of the connected parts. The
signal will disappear as soon as the causes are removed, except for the ground
insulation fault on photovoltaic panels, for which the intervention of qualified
personnel is required. Usually, when an error signal appears, an action is needed. This
action will be managed as much as possible by AURORA or, in case this is not
possible, AURORA will supply all the necessary information to assist the person
fixing the fault on the equipment or system. See the Error column (E) in the table
below.

«
...
38
39
40
41
42
...
»

Содержание AURORA


































































Отзывы:

Нет отзывов