Operation and installation manual
Page 74 of 96
(PVI-STRINGCOMB (-S, -MC, -S-MC) - Rev:1.0)
12.7 PVI-STRINGCOMB Monitoring (Single)
The main screen of the monitoring system is divided as follows:
Figure 12-3: Single Monitoring Panel
(1) Monitoring start button. It flashes when monitoring is started.
(2) Levels of signals coming from the external sensors. The
measurement of these levels can be set from the menu Configuration
Aux-inputs settings (see Paragraph §12.8.3).
(3) Digital signals and antitheft warning light status. The measurement of
these levels can be set from the menu Configuration
Digital Inputs
settings (Ref. §12.8.4).
(4) PVI-STRINGCOMB(-S) Status. Parameter status indication: green (OK) /
red (NOT OK).
The failure indications (red) are the following:
4
3
2
1
5
6
8
7
9
10
