Operation and installation manual
Page 37 of 96
(PVI-STRINGCOMB (-S, -MC, -S-MC) - Rev:1.0)
Figure 9-1: Example of box position
The supports on which the device is fitted must be of non-flammable
material. There must be no inflammable material in the vicinity and if the
device is positioned indoors, it is advisable to install a smoke detecting
device.
When drawing up the project for the system, the data relative to
environmental conditions should be taken into account (Ref. Appendix
A: Technical Data).
Since no external heat sink unit is foreseen, the device must be kept in a
well-aerated place.
