Operation and installation manual
Page 69 of 96
(PVI-STRINGCOMB (-S, -MC, -S-MC) - Rev:1.0)
12.4.2 Operations for assigning the Field Number
From this window, the Field Number can be assigned to all the PVI-
STRINGCOMB(-S) connected on the RS485 line.
Follow the steps below:
Press [Scan S.COMB by S/N]: the system will find all the STRINGCOMB
devices connected and operating. Every unit
will be identified by a different S/N.
Set the No.: assign the Field Number (default is always 1) to
each unit found and according to the description given in
Paragraph §12.4.1.
After assigning all the FN, go on to the next point.
PVI-STRINGCOMB
DETECTED
Assignment of
the Field
Number
1
2
3
At
this
point,
write down the
Field Number.
