Operation and installation manual
Page 40 of 96
(PVI-STRINGCOMB (-S, -MC, -S-MC) - Rev:1.0)
9.3 Electrical Connection
After correct positioning of the device (Ref. §9) having checked that there is no
external electrical connection, make the electrical connections, with the box open,
as indicated here below:
Figure 9-4: Removal of the Plexiglas guards
Now connect all signals listed below, items 1 to 10, since at this stage
the device is not connected to the photovoltaic field.
9.3.1 Removal of the guards
Remove the Plexiglas guards by unscrewing the supporting screws. It
is recommended to remove one guard at a time (i.e. remove the
positive-side guard, connect the positive strings, close the guard and
proceed in the same way on the side for negative voltage) in order to
avoid any accidental contact. (Ref. §9.3.10, §9.3.12, §9.3.13)
