15
10.
STOPPING THE ENGINE:
10.1.
Stopping the engine whilst in the “generator” function:
10.1.1.1. Turn the circuit breaker to the “OFF” position
10.1.1.2. Disconnect the load from the AC receptacle
10.1.1.3. Turn the key to the “OFF” position
10.1.1.4. Turn the fuel cock off
10.2.
Stopping the engine whilst in the “welder” function:
10.2.1.1. Stop welding
10.2.1.2. Turn the key to the “OFF” position
10.2.1.3. Turn to fuel cock off
11.
TROUBLESHOOTING:
11.1.
If the engine will not start:
11.1.1.1. Open the fuel cap to check if the engine has sufficient fuel.
11.1.1.2. Open the oil cap dispenser and check if the machine has sufficient oil.
11.1.1.3. Remove the spark plug and turn the key to the “ON” position
11.1.1.4. Check to see if there is spark coming from the spark plug.
11.1.1.5. Replace the spark plug if necessary.
