19
Please ensure that when replacing, it is replaced with the same size.
12.3.
Air Filter:
12.3.1. Remove the air filter from the air filter casing/cover.
12.3.2. Take the filament out of the housing.
12.3.3. If the core is dirty then wash it in kerosene, squeeze it before soaking it in engine oil.
Before replacing squeeze out the excess oil.
12.3.4. If the filament is damaged or torn please replace it.
12.3.5. Do not run your engine with a dirty or damaged air filter filament as this will affect the
performance of this machine.
12.4.
Fuel Sediment Cup:
12.4.1. Turn the fuel cock to the “OFF” position
12.4.2. Remove the sediment cup, O ring and filter and clean them in a “NON FLAMABLE”
solvent.
12.4.3. Replace the parts back in their original position.
12.4.4. Loosen the screw and remove the spark arrester.
12.4.5. Remove carbon deposits/carbon build up from the spark arrester by using brush.
12.4.6. Install the spark arrestor correctly.
12.4.7. The spark arrestor must be serviced every 100 hours in order to maintain its efficiency.
