16
If the engine will still not start then contact Gentech Industries for technical assistance.
The details are on the back page of this operators manual.
11.2.
No electricity/voltage at the AC Receptacles:
11.2.1.1. Check if the circuit breaker is in the “ON” position. Turn to the “ON” position if necessary.
11.2.1.2. If there is still no electricity/voltage after this has been done it is possible that there is
something wrong or damage has been caused to the AVR (Automatic Voltage Regulator)
and or Rotor/Stator.
Do not attempt to do anything further, contact Gentech Industries immediately for
assistance.
