11
7.4. Turn the aut0-throttle switch to the “OFF” position
Warning
Do not overload your generator, only load up to the rated power under the rated ambient conditions.
Note that operating your generator in extreme humidity and temperatures or in an environment that is
not well ventilated will affect the performance and a reduction in power will be noticed.
8.
USING THE WELDER:
8.1. Turn the circuit breaker to the “OFF” position
8.2. Connect the welding cables to the respective welder terminals
8.3. Turn the auto=throttle switch to the “AUTO” position
8.4. Set the welder/AC 50Hz selector to the ”WELDER” position
8.5. Set the current adjusting dial to the required current level
Caution
NEVER CONNECT ANY TYPE OF ELECTRICAL APPLIANCE TO THE AC RECEPTACLES
WHILST THE SELECTOR IS SET TO THE “WELDER” POSITION.
9.
ACTUAL WELDING:
9.1.
Selecting the correct welding current:
9.1.2
First measure the thickness of the steel plate that requires welding. Then select the
