8
5.
PRE OPERATING INSPECTION:
Caution
5.1. Engine Oil – This is a major factor affecting the performance and life span of the Welder
Generator. Do not use non-detergent and 2 stroke oil as this will damage the Welder
Generator.
5.2. Before using the Welder Generator check the oil level, ensure that the unit is on a flat and
level surface when doing this and that the unit is “OFF”
5.3. The recommended oil to use is 4 – stroke gasoline engine oil IE SAE10w-30
5.4. Running the Welder Generator with insufficient engine oil will cause damage to the Welder
Generator.
5.5. Please note that the Welder Generator is fitted with a “low oil alert sensor”.
5.6.
Only use clean un- leaded fuel when operating/running the Welder Generator.
Dirty/contaminated fuel will cause damage to the Welder Generator and will affect the
performance.
Warning
5.7. Gasoline is extremely flammable, exercise extreme caution when putting fuel into the fuel
tank. DO NOT BE NEGLIGENT.
