- 15 -
0500_GB-Schneidwerk_563
GB
(Mechanically)
- Move stirrup grip (A) to position P2
- Insert lever (H) into hexagonal socket on cutter bar.
- Move lever forward.
- Cutter bar swivels out to central position.
- Lever (H) is located underneath front collapsible side
guard.
Attention!
Increased chances
of injury with all
work carried out
on cutter bar,
particularly with
swinging cutter
bar in from the
side or when
swivelling it up!
Swivelling out upper cutter bar
Important checks to be carried out on the cutter
beam before each operation
- left and right hand pins locked
- for wear on the cutters
- for dirt on the cutter overload fuse
- for adequate ground clearance
* Vehicle must not be driven whilst cutter beam is in fully
extended position
General information
To facilitate maintenance work on the cutting unit, the
cutter beam can be swung on to the left-hand side of the
vehicle (Optional equipment).
All cutters are then accessible:
- for grinding the cutters
- for installing or removing the cutters
- for cleaning
Swivelling out lower cutter bar
• When only one cutter bar is needed for mowing,
the lower cutter bar can be swivelled out using the
accoompanying lever (H).
Attention!
Do not reach into swivel range of cutter
bar when swivelling in / out.
cuTTer uniT
