- 0 -
0601-GB-DIREct-contRoL_563
GB
DirecT conTrol - oPeraTion
1
2
4
5
6
7
8
Automatic Loader- unloader
3)
)
Only if level sensors are available
Switching on automatic loader
Adjustment process:
The operating device is switched off in the starting
position
- Press
button 7
and hold
and then
- Briefly press
button 8
(2 seconds)
until LED 7 lights up briefly and an acoustic
signal sounds
Advantages of the automatic loader
- very compacted load
- minimum blockages in the feeder channel
- prevents overloading the entire drive
- forage protection
- relieves the driver
- increase in load capacity
Control of the automatic loader through
- level sensor below
)
- level sensor (flap above)
)
- oil pressure switch
)
Functional procedure
- A level sensor reacts
- scraper floor switches on automatically
- forage conveyed to the rear
- procedure repeats until loading space is full
WAGON FULL indicator
• when the oil pressure switch registers excessive
pressure
- double horn tone sounds on control panel
Check status:
1. Switch operating device off using
button 8
(LED 8 does not light up)
2. Switch operating device on using
button 8
-
LED 7
lights up briefly:
Automatic loader is activated
-
LED 7
remains dull:
Automatic loader is deactivated
-
LED 5
lights up briefly:
Automatic unloader is activated
-
LED 5
remains dull:
Automatic unloader is deactivated
Status is shown each time the operating device is
switched on.
Switching on automatic unloader
Adjustment process:
The operating device is switched off in the starting
position
- Press
button 5
and hold
and then
- Briefly press
button 8
(2 seconds)
until LED 5 lights up briefly and an acoustic
signal sounds
Advantages of the automatic unloader
- fast, efficient and even unloading
- forage protection when unloading
- One press of the button opens the tailgate and starts
unloading
Functional procedure
- open the tailgate
- Scraper floor starts at the given speed
Take note!
The automatic
loader needs to be
switched on only
once.
