- 16 -
0500_GB-Schneidwerk_563
GB
cuTTer uniT
- Move stirrup grip (A) to position P2
Swivelling out cutter bar hydraulically
1)
Attention!
Cutter bar is
swivelled out and
in hydraulically.
Beware of
crushing in stirrup
grip area!
- Swivel cutter bar out with hydraulic cylinder (Z)
- Bar locks in central position
1. Press cutting unit button (3)
- The integrated control lamp (LED) lights up
2. Activate control valve on tractor
- Cutter bar swivels out
3. Deactivate hydraulic function
- Press button, integrated control lamp (LED) goes
out
For safety reasons always deactivate the
preselected function
See chapter “Select-Control Preselection”
also
1)
Optional equipment
Variant with Select-Control operating unit
1. Swing cutting unit in
Press (3) button and hold
(= touch function)
- The control lamp (LED), integrated into the key,
glows red.
- Cutting unit swivels in under pressure
2. Swing cutting unit out
Press (4) button and hold
(= touch function)
- The control lamp (LED), integrated into the key,
glows red.
- cutting mechanism is swivelled out
The cutting sensor available (option) signals the LED
(constant light) of the swivelled out state.
Signal tone when Pick-up is lowered
See chapter “Direct-Control Operation” also
Variant with Direct-Control operating unit
3
3
4
