- -
GB
PuTTing inTo oPeraTion
000_GB-InBETrIEBnAhmE_511
Checking before operation
1. Check that all safety equipment (coverings, casings,
etc.) are in proper order and fitted in position on the
trailer.
2. Grease the trailer in accordance with the lubrication
chart. Check the gearing for tightness and the oil
level.
. Check that tyres have the correct air pressure.
4. Check that wheel nuts are sitting firmly.
5. Ensure the correct p.t.o.-r.p.m..
6. Make the electrical connections to the tractor and
check that they are correct. Take note of the tips in
the operating manual!
7. Carry out the following adaptions:
• Drawbar height
• Laying of brake cable
• Install hand brake lever in the tractor cabin.
8. Secure trailer using only the fixtures provided.
9. Cut drive shaft to the correct length and check the
function of the overload safety (see supplement).
10. Check the electronic unit function.
11. Connect hydraulic lines to tractor.
• Check hydraulic hoses for damage and wear.
• Ensure the correct connection.
12. All swivelling parts (tailgate, adjusting lever, etc.) must
be secured against dangerous position changes.
1. Check parking brake and service brake functions.
Before starting work
a. Before commencing work, the operator must be aware
of all operating devices and functions. The learning
of these is too late after having already commenced
operation!
b. The vehicle is to be tested for traffic and operating
safety before each operation.
c. The danger of being crushed or cut exists in the Pick-
up, cutting unit, tailgate and upper extension areas.
All persons must be shown out of these areas before
activating hydraulic equipment and turning on the
drive.
d. Before driving the vehicle, the driver must ensure that
nobody will be endangered and that no obstructions
are present. If the driver is unable to see and have an
overall view of the roadway directly behind the trailer,
he must be guided by somebody while reversing.
e. Observe the safety tips which are attached to the trailer.
An explanation of what the individual graphic warning
symbols mean can be found on page 5.
f. Observe also the tips in the respective chapters and
in the supplement to this operating manual.
Instruction!
The following tips
should make
the trailer's
operation easier
for you. Detailled
information for
individual points
can be found in
the respective
chapters in this
operating manual.
