POSTBERG+Co measuringSYSTEM MA-Di, Руководство по эксплуатации, Страница: 6 / 44

6
2.2 Installation, start-up and operation
The measuringSYSTEM was manufactured and tested for reliable
operation and left the factory in a fault-free safe condition.
As user, you shall be responsible for compliance with all applicable
safety regulations, e.g.:
• Installation regulations
• Local standards and regulations.
The manufacturer has taken every effort to ensure safe operation.
The user has to make sure that the devices are placed and installed in
such a way that their safe use is not affected.
The devices were factory-tested and delivered in reliable operating
condition. The present Operating Instructions include information and
warnings that must be followed by the user to enable safe operation.
• Installation, start-up, operation and maintenance of the measuring
device may only be performed by trained and qualified personnel .
This qualified personnel must be authorised by the plant operator to
perform the described activities.
• The qualified personnel must have read and understood these
Operating Instructions and must follow the mentioned instructions.
• Check before starting up of the overall measuring point if all connections
have been made correctly.
• Any damaged products must not be started up and shall be safe-
guarded against unintended start-up. The damaged product must be
marked as defective.
• Any failure on the measuring point may only be remedied by authorised
and trained personnel.
• If failures cannot be remedied, the products must be taken out of
operation and safeguarded against unintended start-up.
• Any repairs which are not described in these Operating Instructions
may only be performed directly by the manufacturer or the service
organisation.
2 Safety precautions