POSTBERG+Co measuringSYSTEM MA-Di, Руководство по эксплуатации, Страница: 30 / 44

30
8.2.1.3 Configure analog value for flow rate
Uni
Select and define measuring unit ( 8.2.4 | p. 33).
SEL2
FLOW
OU2
Select and
set.
Select and set function.
I = flow rate proportional current signal (4…20 mA)
ASP Select and set value where the minimum value is provided.
AEP Select and set value where the maximum value is provided.
8.2.2 Settings for consumption rate monitoring
8.2.2.1 Configure volume monitoring through impulse output
OU1
ImP
Select and
set.
ImPS Select and set flow rate where 1 impulse
is provided (
8.2.6 | p. 36).
ImPR
YES
Select and
set.
> Impulse repetition is active.
Output 1
always gives a counting
impulse if the value set in
ImPS
is reached.
8.2.2.2 Configure volume monitoring through preselection counter
OU1
ImP
Select and
set.
ImPS Select and set flow rate where Output 1 will switch
( 8.2.6 | p. 36).
ImPR
NO
Select and
set.
> Impulse repetition is not active. The output switches
ON , when
the value set in ImPS is reached. It remains switched-on until the
counter is reset.
8 Progr Parameter setting