POSTBERG+Co measuringSYSTEM MA-Di, Руководство по эксплуатации, Страница: 26 / 44

26
7.2 Menu explanation
SP1 / rP1 S witching p oint or r eset p oint
Upper / lower limit value for flow rate
ImPS Impulse valence
ImPR Impulse repetition yes = active = Impulse output or
nO = not active = Function preselection counter
OU1 Output function for OUT1 (flow rate or consumption rate):
- Switching signal for limit values: Hysteresis function Hno or Hnc
or window function Fno or Fnc
o = normally open = NO contact, c = normally closed = NC contact
- Impulse switching signal for volume meter
OU2
Output function for
OUT2
(flow rate or temperature):
- Switching signal for the limit values: Hysteresis function or
window function, normally open or normally closed
- Analog signal: 4-20 mA [
I
]
Alternative
:
OUT2
(Pin2) as input for external reset signal
Configure: Setting:
OU2
=
InD
SP2 / rP2 S witching p oint or r eset p oint
Upper / lower limit values for flow or temperature
SP2 and rP2 are only active if OU2 = Hno, Hnc, Fno or Fnc
ASP / AEP A nalog s tarting p oint / A nalog e nd p oint for flow rate or temperature
DIn2 Configuration of input (Pin2) for counter reset
EF E xpanded f unctions / opening of menu level 2
HI / LO Maximum value memory / minimum value memory for flow rate
FOU1 Behaviour of output 1 in the case of an internal fault
FOU2 Behaviour of output 2 in the case of an internal fault
dAP
Measured value damping / damping constant in seconds
rTo Counter reset: Manual reset / time-controlled reset
diS Updating rate and orientation of display
Uni Standard dimension for flow rate: Nl/min, Nm³/h or Nm/s
SELd Standard measured value of display:
Flow rate value, counter reading or media temperature
7 Menu