background image

i

No warranty of any kind is made in regard to this material, including, but not limited to, implied 

warranties of merchantability or fitness for a particular purpose. We are not liable for any errors con-
tained herein nor incidental or consequential damages in connection with furnishing, performance 
or use of this material.

No part of this document may be reproduced, transmitted, stored in a retrieval system, tran-

scribed, or translated into any language or computer language in any form or by any means elec-
tronic, mechanical, magnetic, optical, chemical, manual or otherwise, without express written 
consent and authorization.

We reserve the right to make changes in product design without reservation and without notifi-

cation. The material in this guide is for information only and is subject to change without notice.

All trademarks mentioned herein, registered or otherwise, are the properties of their various 

respective owners.

Copyright © 2004. All rights reserved.

Radio Notice

This equipment generates, uses and can radiate radio frequency energy. If not installed and 

used in accordance with the instructions in this manual, it may cause interference to radio commu-
nications. The equipment has been tested and found to comply with the limits for a Class A comput-
ing device pursuant to EN55022 and 47 CFR, Part 2 and Part 15 of the FCC Rules. These 
specifications are designed to provide reasonable protection against interference when operated in 
a commercial environment.

Radio and Television Interference
Operation of this equipment in a residential area can cause interference to radio or television 

reception. This can be determined by turning the equipment off and on. The user is encouraged to 
try to correct the interference by one or more of the following measures:

* Reorient the receiving antenna.
* Relocate the device with respect to the receiver.
* Move the device away from the receiver.
* Plug the device into a different outlet so that the device and the receiver are on different 

branch circuits.

If necessary the user may consult the manufacturer, an authorized dealer, or experienced 

radio/television technician for additional suggestions. The user may find the following booklet pre-
pared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV 
Interference Problems.” This booklet is available from the U.S. Government Printing Office, Wash-
ington, DC 20402 U.S.A., Stock No. 004000003454.

For CE-countries

This scanner is in conformity with CE standards. Please note that an approved, CE-marked 

power supply unit should be used in order to maintain CE conformance.

Содержание SM2430


























Отзывы: