POSline SM2430, Руководство пользователя

Страница: 11 / 25

7
Auxiliary Handheld Scanner Connection (optional)
The scanner supports the operation of an auxiliary handheld scanner, which
may be connected via a 10-pin RS-232 modular plug to the connector marked
“aux” in the back of the scanner.
1. Insert the connecting cable in the slot in the mounting plate, but reverse the
cable relief molding of the scanner interface cable in the mounting plate to
allow space for the auxiliary handheld scanner cable.
2. Insert the 8-pin modular plug of the power link cable into the “host” connec-
tor in the back of the scanner until a firm click is heard.
3. Insert the auxiliary cable connector into the 10-pin “aux” jack until it clicks
and route the cable through the space above the scanner interface cable.
4. Move the scanner into position on the mounting plate, engaging the tab on
the underside. Be careful not to pinch any cables.
5. Replace the mounting plate screws.
Back Mounting
If desired the scanner may be mounted to your own custom bracket using the
threaded mounting holes on the back. (See Figure 1.) The mounting holes are
threaded to accommodate M4 x 0.7 machine screws to a depth of 5.0 mm.
Make sure your bracket design allows for the exit of the interface cable. The
supplied mounting plate protects the interface cable connection, but requires
that the cable exits from the back of the unit.