background image

1

1   Introduction

This advanced scanner is a proud to be among the world's first dual-laser pre-
sentation scanners, and it incorporates numerous record-breaking features. Its 
pioneering application of dual laser diodes drastically enhances scanning 
power by doubling the scan lines, broadening scan angle and intensifying the 
scan pattern across the scan field. With this state-of-the-art technology, it is 
able to deliver a comprehensive 32-line scan pattern cycling at 2400 scans per 
second. The scanner is additionally equipped with Z-SCAN technology—an 
innovative ASIC hardware decode protocol that provides real-time decoding 
that effectively shortens customer transaction time.

The broad, omnidirectional scan field effectively facilitates hands-free scanning 
of barcodes on products of many different shapes. Also, the scanner is pro-
grammed with multiple beeper tones and barcode data edition functions to 
accommodate a variety of applications.

2   Unpacking

The Dual-Laser Omnidirectional Vertical Scanner package should contain:

1 ea.

Dual-Laser Omnidirectional Vertical Scan-
ner, with attached mounting plate

1 ea.

5V power adapter (model depends on 
electrical requirements of your geographic 
location)

1 ea.

User's Manual (this booklet)

1 ea.

Programming Guide

1 ea.

Connection cable (This cable is usually, 
but not always, supplied. Model depends 
on customer needs.)

Please check for any damaged or missing items; contact your dealer if there is 
a problem. 

Содержание SM2430


























Отзывы: